Contact Form
Nexcom EBC 356 3.5" board
- On-board Intel® Pentium®/Celeron® Processors N3000 product family (codename Braswell)
- Supports dual channel DDR3L 1600MHz, 2 x SO-DIMM, up to 8GB system memory
- 3 x HDMI connector, 2 of 3 HDMI resolution support 4K/2K
- 2 x SATA 3.0/ 4 x USB 3.0/M.2 module/ 4-in & 4-out GPIO, Mic-in , Speak out
- Support AT/ATX mode and single +12VDC input
- Brand: NEXCOM
- Model: EBC 356
-
Factory Automation
$0.00
Ex Tax: $0.00
$0.00
Ex Tax:$0.00
$0.00
Ex Tax:$0.00
EBC 35EBC 356 is a 3.5” SBC embedded board equipped with Intel® Pentium®/Celeron® Processors N3000 product family to provide high performance with lower power consumption structure for any application, which supports DDR3L 1600 memory, along with integrated Intel® Gen. 8 Graphics Engine enhanced Gfx & video, and support DX 11*. EBC 356 also provides two SATA 3.0, four USB 3.0 ports, one M.2 interface, and supports triple HDMI outputs.
You can place an order for the Nexcom EBC 356 3.5" board, which is applicable in the Factory Automation industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
| Nexcom Embedded Board : General | |
| CPU Support | Support Intel® Pentium®/Celeron® Processors N3000 product family |
| Display | Integrated Intel® Gen. 8 Graphics Engine, Supports HDMI interface, 3 x HDMI connector, 2 of 3 HDMI resolutions support 4K/2K,(3840x2160 @ 30Hz, 2560 x 1600 @ 60Hz), 1 support 2K (2560x1440 @ 60Hz) |
| System | - |
| BIOS | AMI System BIOS, Plug and play support, Advanced power management and advanced configuration & power interface support |
| Storage Device | 2 x SATA 3.0 ports |
| Expansion | 1 x M.2 slot, for an optional 3G/4G or M.2 SSD module |
| I/O Interface | COM1/2: RS232 1 x10 pin JST connector, 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL level (0/5V), One 4-pin FAN connector, One 3 pin header for AT/ATX mode, One 6 pin header for PS2 keyboard & mouse, One 4 pin header for power/storage LED, Onboard buzzer/SMBus2.0/reset SW/on & off switch button |
| Operating System | - |
| Nexcom Embedded Board : Power Requirements | |
| Power | +12V DC Input, One 4-pin power connector |
| Nexcom Embedded Board : Physical Characteristics | |
| Operating temperature | -20°C to 60°C |
| Storage temperature | -25°C to 85°C |
| Relative humidity | 10% to 90% (operating, non-condensing), - 5% to 95% (non-operating, non-condensing) |
| Dimensions | 146mm (L) x 102mm (W) 5.7” x 4.0” |
| Standards and Certifications | Meet CE, FCC Class A |